6010 Single Hung

Vinyl Colors Available:
EuroWhite, Tan (Beige), Earthtone

  • Designed to withstands a wind load of 131 MPH
  • Protects against leaking with rain gusts of up to 54 MPH
  • 180 Brick mould
  • Easy to operate recessed tilt latches
  • 5o Sloped sill
  • Integral nail fin makes for an easier set-in-place and nail installation
  • Fusion welded sash is reinforced with aluminum
  • 3/4″ Insulated glass for energy efficiency
  • Continuous head and sill
  • Concealed block and tackle balance system
  • Available in euro-white, tan, earthtone
  • Available in painted bronze exterior
  • Custom exterior colors available
Category:

Description

This window is suitable residential application and is fully tested and vetted for the multi-family segment of the market. Available in bronze or earthtone exterior paint (as well as custom colors) and white/tan/earthtone interior, this window now meets meets the color demands of Architects and builders. The window has wet glaze “drop-in sash” design. The window has 3/4 OA insulated glass. Similar to our 5010 series, this window is positioned for the cost conscious. This window has been tested to a design pressure of 30 (DP30) and will withstand a wind load of 131 MPH without the window breaking. {A DP50 upgrade is available–see the 6060 in the WindStrong Section} The 6010 series will pass a DP50 water test. So in other words, the 6010 Series window will not leak with rain blowing against the window at 54 MPH. Our Series 6010 comes with a factory integral mull on multiple windows, which creates a continuous head and sill–which further eliminates leaks in the field. If your in the market for a Single Hung window that has a 180 brickmould, a 5 degree slope sill–then the 6010 window is the window for you. If you can find a cost conscious vinyl window with the curb appeal of the 6010 Series, and performs better than our window, then, by all means–buy it!

Optional: 6010 SHNJ Series Vinyl Single Hung Window
(6010 without the J-Channel)

This is a 6010 Series single hung without the J-Channel. This window is offered for applications in which a J-channel is not desired. This option will go well in a Stucco application or Hardy board application.

Window Details
Product FamilySingle Hung
Comparable WindStrong Product6060
Product StylesSingle Hung, 2 Sash Slider, 3 Sash End Vent Slider, Picture, Transom, Custom Shapes
Sash ConstructionFusion Weld
Standard Nailing FinStandard
Standard J ChannelStandard
Standard Brick MouldStandard
Sloped SillStandard
Balance SystemBlock & tackle
Lift Rail PlacementTop
Standard Grill13/16" Flat
Continuous Head & SillYes
Overall Frame Depth2 15/16"
Nail Fin Set Back1 1/16"
Interior Jamb Depth1 13/16"
Glass Package3/4"
Egress Size3' x 5' 2"
Frame & Sash Options
ColorsWhite & Tan
Sash Size ProportionsSH & 2SS (Oriel, Cottage) 3SS (33/33/33, 25/50/25)
Applied Nail FinN/A (Built In)
Extended Jambs4 9/16" or 6 9/16" Primed Wood
Available Glass Options
Low E270 and 366
Gas FilledArgon
Tint & ObscureObscure, Niagra,
Bronze, Grey
Double StrengthAvailable
Tempered Glass
(Unit sizes over 96" or 32 sqft Required)
Available
Grill Options
Grille Types13/16" Flat Bar
Grille PatternsColonial, Prarie, Ladder, Diamond & Custom
Screen Options
SizeHalf Screen
MeshCharcoal Fiber Glass, Wire

SDL = Simulated Divided Line | GBG = Grills Between Glass | Low E = Low Emittance